en-45
CONTROLS 6
6.5.6 RESET DEFAULT PARAMETERS _______________________________________
The machine will have factory set
defaults. You can reset to factory
settings by Using the PIN Menu
Buttons 2 and 3
to
arrow up and
down
,
and
Button 4
to
select Set
Default Parameters. Press arrow to
confirm.
6.5.7 CHANGE PIN _______________________________________________________
Using the PIN Menu
Buttons 2 and 3
to
arrow down to the bottom of the
list
,
and
Button 4
to
select Change Pin, this gives you the option to
change from the default Owner’s PIN Number.
6.5.8 BRIGHTNESS _______________________________________________________
Using the PIN Menu
Buttons 2 and 3
to
arrow down to the bottom of the
list
,
and
Button 4
to
select Brightness, this gives you the option to change
from day to night mode.
The top line is used to alter the brightness in daytime mode. The middle
line is used to alter the brightness in night time mode. Bottom line is used
to set the threshold at which the screen automatically changes from day
-
time to night time mode and vica-versa.
6.5.9 LANGUAGE MENU___________________________________________________
When you access the language selection page, the checkmark appears
next to the selected language.
When the checkmark is moved up and down, the language does not
change until
Button 4
is used to select and store the language. At that
point the title bar changes to the new selected language.
The options will always be in the correct language.
English, Deutsch, Francais, Dansk, Svensk, Nederlands and Español.
Set Default Parameters
Press To Confirm Set
To Default Parameter Values
Set Default Parameters
Press To Confirm Set
To Default Parameter Values
Are You Sure?
Yes
No
Change Pin - Owner
New PIN: * * * *
Confirm: 1 _ _ _
Brightness
100%
50%
814
Language
English
Deutsch
Francais
Dansk
Svensk
Nederlands
Español
