en-43
CONTROLS 6
6.5 SETTINGS __________________________________________________________
Within the settings Menu you will find the three options:
• Measurement Units
• Pin
• Brightness
6.5.1 MEASUREMENT UNITS_______________________________________________
Buttons 2 & 3
move the arrow up and down the list,
Button 4
selects
parameter to be altered, then
Button 2 & 3
scroll between the unit types.
When amended as necessary
Button 1
then saves the setting.
6.5.2 PIN________________________________________________________________
This screen gives access to the following parameters and machine functions that can be altered:
• Cross Cut
• Traction Boost
• Inclinometer
• Set Default Parameters
• Change PIN
The default owner’s Pin is 1001, however Ransomes Jacobsen recommend this is changed.
Settings Menu
Measurement Units
PIN
Brightness
Measurement Units
Speed
Km/h
Pressure kPa
Volume Litre
Temperature °C
Fuel Rate
L/h
Enter Pin
_ _ _ _
1 0 0 1
Enter Pin
Enter Pin
PIN Menu
Cross Cut
Traction Boost
Inclinometer
Set Default Parameters
Change PIN
