Ransomes G - PLEX WD series, Service Course Manual

Page: 5 / 181

2
SECTION 2
CONTROLS
T CONTROLS
Figure 11
1. Voltmeter
2. Hour Meter
3. Headlight Switch
4. Engine Oil Warning Light
5. Ignition Switch
6. Throttle
7. Turf Protection System (optional)
8. Pre–Heat Switch and Glow Plug Light
9. Temperature Gauge And Warning Light
10. Reel Enable Switch
Voltmeter - indicates battery condition.
Headlight Switch - turns the headlights on and
off.
Engine Oil Warning Light - will come on when
the engine oil pressure is too low for
operation.
Ignition Switch - has four positions:
OFF - prevents all electrical functions
from operating. Switch must be in the
OFF position to remove the key.
ON - for normal operation.
START - engages the starter. Release
the key after engine starts (the switch
automatically returns to ON).
ACC. - has no function on this unit.
NOTICE
• If the engine fails to start, or if it
“dies” for any reason, the ignition
switch must be returned to the OFF
position before restarting is
attempted. This feature prevents
damage to the starter and flywheel
teeth that can occur if the