Ransburg 9040, Service Manual

Page: 43 / 49

9040 Low Voltage Control Unit Kit- Parts Identification
Figure 12b: 9040 Low Voltage Control Unit Kit Parts Diagram
For Both 80072 and 80078
9040 Low Voltage Control Unit Kit- PARTS LIST
Item # Part # Description Notation
1
76892-41
76892-42
PC Board and Heat Sink Assembly: For approved AEMD500
PC Board and Heat Sink Assembly: For un-approved Evolver SE
2 76434-01 ON./OFF Switch 1SW
3 70556-03 High Voltage Adjust Potentiometer 1POT
4 76436-91 Kilovolt (kV) Meter 1M
5 76436-92 Microamp (
m
A) 2M
6 72231-00 Low Voltage Cable Socket 3SOC
7 25766-106 Pressure Switch 1PS
8 75337-05 Power Supply, 18VDC 1SUP
9 LSME082-04 Fuse, PC Board, Slow Blow, 4 Amp (See Figure 5 for location.) F2
10 Fuse, Front Panel:
72771-06 Slow Blow, 1 Amp, 110-120 VAC Input 1FU
72771-01 Slow Blow, 0.5 Amp, 220-240 Input 1FU
11 76449-00 Detachable AC Line Cord
12 70539-00 Ground Wire Assembly
13 76455-01 LED Display Board
14 Overload Indicator and Reset Switch Assembly:
76442-01 Reset Switch (normally closed)
76441-00 Lens, Yellow
76443-01 Bulb
15 5627-00 Rubber Feet
16 76895-15 For 76580-DXXXX (Triple Setpoint/Analog Input Interface Board)
17 76298-XX
Low Voltage Cable -10 (3m length),-25 (7.5m length) and
-36 (11m length) available
18
76300-03
76300-01 External Cascade Assembly For 80072 units (Atex Approved)
External Cascade Assembly For 80078 units ( NOT Approved )
19 80074-00 Cable Coupling
20 80073-00 Strain Relief
21 7296-00 Nut, Cable Plug
22 A10560-XXX
High Voltage Cable -15D (4.5m length) ,-25D (7.5m length),
-50D (11m length), 75D (22.5 m length) available