9
Fast freezing can be stopped by the user, or automatically if the Peltier begins to freeze over.
Press this button to activate/inactivate fast freezing, which is indicated by the right LED
light and the running sound of both compressors.
Programming start-of-work timer
Press this timer setting button until the second line on the LED screen shows
“T
ON
”,
then use the
“D” ”H”, and “M” buttons to set the start-of-work time.
User can set single-day start-of-work time as following:
After pressing the
“W-DAY” button, the first line in the LCD will show “Dwork 1&6” (
“1&6” represents Monday to Saturday). Press the “D” button to select a working day,
then press the
”H” and “M” buttons to adjust hour and minute, respectively. The system
will automatically set 24 hours of the standby mode for non-working days.
Programming end-of-work timer
Press this timer setting button until the second line on the LED screen shows
“T
Off
”,
then use the
“D” ”H”, and “M” buttons to set the end-of-work time. After setting, press
this timer setting button again to store the settings and return the LED screen to the
initial mode.
Programming defrost timer
Press this defrost timer button, the first line on the LCD screen displays
“Defrost” and
the second line displays
“Time”. User may press the ”H” and “M” buttons to adjust hour
and minute. If defrost is not needed, please set
“hours” to 24. Press this defrost timer
button again to store the settings and return the LED screen to the initial mode.