TF4039-013426-RO English
19
20190717 Ver.1
5. Unscrew the pre-assembled nut from the threaded
pin of the burner (9). Then insert the threaded pin at
the bottom of burner into the center hole of burner
supporting bar. Make sure the alignment pin on the
burner seat in the notch on the edge of burner
supporting bar. Align the holes on heat shield (7) with
threaded pin and alignment pin of burner (9) and hole
on burner supporting bar, then fix the heat shield (7)
outside the burner supporting bar and tighten with
hex nut (on the threaded pin) onto the bolt of burner
(9).
6. Align timer control box (8) to the timer box supporting
bar on small T-support leg (5) and fix it with bolts
M6x12 (A) by going through the supporting bar and
then to the timer box.
7. Mount the adjustable pot tip guard (6) on to welded
stand (1) by bolts M6x12 (A) and flange lock nuts M6
(B).
8. Press and fix the U-shaped end of hook (15) into the
slot on regulator.
7
Burner
supporting bar
Threaded
pin
Timer box
supporting bar
15
