TF2133002-RG-00 ENG Page 5 of 17 20160608-Ver.1
Do not store LP tanks in an area where children play.
LP Tank
The LP tank used with your appliance must meet the following requirements:
Purchase LP tanks only with these required measureme
nts: 12” (30.5cm) ( diameter) x 18”(45.7cm)(tall) with 20lb.
(9kg). Capacity maximum.
The LP-gas supply cylinder to be used must be constructed and marked in accordance with the specifications for
LP-gas cylinders of the US Department of Transportation (DOT) or the National Standard of Canada,
CAN/CSA-B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods.
LP tank valve must have:
Type 1 outlet compatible with regulator or appliance.
Safety relief valve.
UL listed Overfill Protection Device(OPD). This OPD safety feature is identified by a
unique triangular hand wheel. Use only tanks equipped with this type of valve.
LP tank must be arranged for vapor withdrawal and include collar to protect LP tank valve.
LP(Liquefied Petroleum Gas)
LP gas is non toxic, odorless and colorless when produced. For your safety, LP gas has been given an odor
(similar to rotten cabbage) so that it can be smelled.
LP gas is highly flammable and may ignite unexpectedly when mixed with air.
LP Tank Filling
Use only licensed and experienced dealers.
LP dealer must purge tanks before filling.
Dealer should NEVER fill LP tank more than 80% of LP tank volume. Volume of propane in tanks will vary by
temperature.
A frosty regulator indicates gas overfill. Immediately close LP tank valve and call LP gas dealer for assistance.
Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous practice.
To remove gas from LP tank, contact an LP dealer or call a local fire department for assistance. Check the
telephone directory under” GAS Companies” for nearest certified LP dealers.
LP Tank Exchange
Many retailers that sell appliances offer you the option of replacing your empty LP tanks through an exchange
service, Use only those reputable exchange companies that inspect, precision fill, test and certify their cylinders.
Exchange your tank only for an OPD safety feature-
equipped tanks as described in the “LP Tank” section of this
manual.
Always keep new and exchanged LP tanks in upright position during use, transit or storage.
Leak test new and exchanged LP tanks BEFORE connecting to appliance.
LP Tank Leak Test
For your safety
Leak test must be repeated each time LP tank is exchanged or refilled.
Do not smoke during leak test.
Do not use an open flame to check for gas leaks.
LP tank must be leak checked outdoors in well-ventilated area, away from open flames or sparks.
Use a clean paint brush and 50/50 soap and water solution.
Use mild soap and water. Do not use household cleaning agents.
Damage to gas train
components can result.
Brush soapy solution onto all weld seams and entire valve area.
WARNING
If “growing” bubbles appear, do not use or move the LP tank. Contact an LP gas supplier or your fire department.
