Bringing the cameras together
For the work of the scanner it is necessary to point both cameras to the same position
on the specified working distance. Install the calibration plate in front of the scanner on
the found working distance (if you changed its position after the projector focusing
procedure).
Turn
on
the
Cross
light
mode
and
aim the scanner to the calibration
plate.
It
is not
necessary
to
combine
cross
with
marks on the plate at
this
stage, the focused projector
should be projecting
a cross on any surface, located at the
working distance from the
scanner. Move the cameras on the bar so that the vertical line of the light cross lies
approximately on the central vertical blue line in the both camera views.
17