Scanner setup
ScanCenter NG launch
Run
RangeVision
ScanCenter
NG
.
If
the
scanner
is
not
connected
or
drivers
aren't
installed,
an
indication
will
appear on the
Start
Screen
,
as
shown
below:
Check
the
connection
of
cables,
power
supply,
and
then
click
Update
.
If
you
are
sure that
all the
components
of
the
scanner
are
connected
correctly
and
the
connection error
persists, manually
select
hardware
in
Hardware
settings
.
If
necessary, contact the
technical support of your
reseller.
If
the
scanner
is
not
connected intentionally and none
of the components
can
be
found,
only
the
processing
functions of ScanCenter NG will be
available.
In
the
case
if
all
the
settings
are
correct,
after
starting
the
program,
you
should
see the
image from the
cameras
in
the
main
application
window.
11