R80EX Tire Changer
36
P/N 5900087 — Rev. B — Jan. 2020
Turbo-Blast™ Bead Sealing System
The Turbo-Blast Bead Sealing System, located on the back of the Tire Changer, provides a very strong
blast of pressurized air that is useful for sealing a stubborn bead.
The system includes:
•
Pressurized Air Tank
. Holds the pressurized air, enough for multiple blasts of pressurized air.
•
Intake Valve with Shutoff Lever
. When the Lever is open, air from the incoming air source
goes into the Pressurized Air Tank. When closed, no air can get into the tank.
•
Pressure Relief Valve
. Releases air pressure from the tank if the pressure gets too high.
•
Hose
. Moves the pressurized air from the tank to the Nozzle.
•
Nozzle
. Where the pressurized air comes out.
⚠
DANGER
Use extreme care with the Turbo-Blast Bead Sealing System. You could cause
product damage, personal injury, or death.
Never
point the Nozzle at a person or
thing.
Only use the Turbo-Blast System to seal a Bead; no exceptions
!
•
Handle
. Gives you an easy way to position the Nozzle.
Use both hands
.
•
Button
. Press to release a powerful blast of air.
Side view. Not necessarily to scale. Not all components shown.
