Ranger Laser-Spot LS43B, Installation And Operation Manual

Page: 3 / 64

LS43B Laser-Spot™ Wheel Balancer
3
P/N 5900086 — Rev. A1 — 12/212018
Table of Contents
Introduction 3 Operation 22
Shipping Information 4 Maintenance 39
Safety Considerations 4 Troubleshooting 40
Components 6 Wiring Diagram 44
FAQ 8 Labels 45
Specifications 9 Parts 47
Installation 11 Maintenance Log 63
Introduction
This manual describes the Ranger LS43B Wheel Balancer, which is a computer-controlled Wheel
Balancer that provides fast, accurate Wheel balancing for a wide variety of Wheels.
The LS43B includes our exclusive Laser-Spot™ technology for precise weight placement.
More information about BendPak Ranger products is available at
rangerproducts.com
.
This manual is mandatory reading for all users of the LS43B, including anyone who sets up,
operates, maintains, or repairs it.
⚠
DANGER
Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
Technical support and service for your Wheel Balancer is available from your distributor or by calling
BendPak Ranger at (805) 933-9970 . You may also call regarding parts replacement (please
have the serial number and model number of your unit available).