LS43B Laser-Spot™ Wheel Balancer
10
P/N 5900086 — Rev. A1 — 12/212018
Installation Checklist
Following are the steps needed to install an LS43B Wheel Balancer. Perform them in the order shown.
☐
1. Review the installation Safety Rules.
☐
2. Plan for Electrical Work.
☐
3. Make sure you have the necessary Tools.
☐
4. Select the Installation Site.
☐
5. Make sure there is adequate Clearance on all Sides.
☐
6. Unpack the Components.
☐
7. Identify the Components on the Back of the Unit.
☐
8. Install the Display Panel.
☐
9. Install the Mount Box.
☐
10. Install the Hood.
☐
11. Install the Outer Arm.
☐
12. Install the Shaft.
☐
13. Anchor the Unit.
☐
14. Connect to a Power Source.
Requires a licensed Electrician
.
☐
15. Test the Balancer.
☐
16. Review the Final Checklist.
Summary of Contents for Laser-Spot LS43B
