Ranger Products R980X, Installation And Operation Manual

Page: 9 / 52

9
SECTION 6
LIFTING/ UNCRATING
1. The R-980X /AT is shipped on a pallet, Approximate
shipping dimensions. (See Fig 6.1)
CAUTION!
Handling of the machine must be performed only with
an appropriate lifting device such as a forklift or pallet
jack. Only personnel who are experienced and
qualified on material handling procedures should
handle any transportation or moving of machine .
CAUTION!
Be careful when cutting steel banding material as items
may become loose and fall causing personal harm or
injury. Always wear gloves when uncrating the machine to
prevent scratches, abrasions, or cuts due to the contact
with packing materials. Eye protection is essential during
uncrating service activity. Safety glasses with side shields,
goggles, or face shields are acceptable.
Remember to report any shipping damage to the carrier
and make a notation on the delivery receipt.
Uncrating Instructions
1. Carefully cut the plastic wrapping and remove.
2. Carefully cut open the top of the cardboard box. Either
lift off box or cut side panel and remove.
(See Fig 6.3)
3. Using a crow bar or pry bar, locate the staple/nail
locations and pry apart the wooden crating. Note: the entire
wooden frame can be lifted off after prying the staples /nails
at the base of the crate. (See Fig 6.4)
4. Carefully cut the Tire Changer free of the plastic
wrapping securing it to the Tire Changer base. Do not
unwrap the Assist Tower and Tower Tank at this time. The
wrapping helps keep the Swing arms from moving during
lifting and assembly. (See Fig 6.5 & 6.6)
Fig. 6.1
Fig. 6.2
Fig. 6.3
Fig. 6.4
Fig. 6.5