38
Transmission Inspection / Lubrication
1. Rotate the Turntable so that the Transmission fill plug
is visible. (See Fig. 17.8)
DANGER!
The motor on this machine contains high
voltage. Disconnect power at the receptacle before
performing any electrical / repairs. Secure plug so that
it cannot be accidentally plugged in during service.
2. Remove the Fill plug.
3. Put a flexible wire into the Transmission Oil Fill Hole
until the wire hits the bottom of the well. (See Fig. 17.19)
4. Remove the wire and check the level of the
Transmission fluid. The oil level should be no more than
1” ( 25 mm) high on the wire.
NOTE:
Filling Oil Level higher will result in
leakage of the transmission seals.
Fig. 17.18
Fig. 17.19
Summary of Contents for R980X
Page 39: ...39 ...
Page 48: ...48 ...
Page 49: ...49 RECORD ALL MAINTENANCE NOTES AND SERVICE HISTORY HERE ...
Page 50: ...50 TIRE AND WHEEL DATA ...