21
22. Lift and hold the tire so it is positioned with the lower
bead in the drop-center portion of the wheel. If the tire is
large/wide or has become stuck on the lower part of the rim,
the lower bead helper disks may be used to un-stick and
raise the tire. (See Fig. 11.29)
23. Insert the smooth curved end of the tool bar over the
right end of demount head and below the lower bead of the
tire. Push the tool bar down toward the wheel to lift the tire
bead up and over the right -side knob portion of the demount
head. Hold the tool bar in this position. (See Fig. 11.30-31)
2
4. Depress the table top pedal to rotate the wheel. The
demount head will guide the bead up and over the edge of
the wheel. Continue rotation until the lower bead is
de-mounted. The helper disks should be removed during
rotation. Swing them out of the way to complete
de-mounting. (See Fig. 11.32)
25. After the tire has been removed from the wheel, depress
the tower tilt pedal to move the tower away from the wheel.
(See Fig. 11.33)
Fig. 11.29
Fig. 11.30
Fig. 11.31
Fig. 11.32
Fig. 11.33
Fig. 11.26
Fig. 11.27
Fig. 11.28
