20
19. Move the right hand top helper roller into position over
the tire just outside the rim edge. Press down on the right
hand control valve and force the tire bead down. This will
make it easier to insert the tool bar. (See Fig. 11.19 - 20)
19. Insert the smooth curved end of tool bar over the right
end knob of the mount/demount head and below the top
bead of the tire. (See Fig. 11.21)
22. With the tool bar in position, move the right hand helper
roller out of the way. (See Fig. 11.22)
20. Push the tool bar down toward the wheel to lift the tire
bead up and over the knob portion of the demount head.
Hold the tool bar in this position. (See Fig. 11.23-25)
21. Depress the table top pedal to rotate the wheel clock-
wise. Leave the left hand helper in position opposite the
demount head and allow it to follow the wheel rotation to
assist the bead into drop center while demounting. Hold the
tool bar down until demounting nears completion.
(See Fig. 11-26 - 28)
DANGER!
The tool bar and demount head may encounter
resistance or come under load at times during
the mount and demount procedures. Keep one
hand firmly on the tool to avoid possible tool
kick back. Use the reversing feature (lift table
top pedal upwards) to back out of jam ups.
Fig. 11.21
Fig. 11.22
Fig. 11.24
Fig. 11.23
Fig. 11.25
Fig. 11.19
Fig. 11.20
