11
SECTION 7
INSTALLATION LOCATION
Disconnect tag and lock out
power source before
attempting to install, service, relocate or perform any
maintenance.
Do not
lift or move unit without appropriately rated
equipment. Be sure the unit is securely attached to any
lifting device used.
Never
use the wood shipping skid for mounting the unit.
Select a location using Figures 7.1 and 7.2. The area
should provide the operator with enough space to use the
equipment in a safe manner. The area selected should be
well lit, easy to clean and should be away from oil, grease,
brake lathe chips, etc. Avoid areas where
bystanders and customers may be present.
Machine size is approximately:
54” W x 52” D X 81”H
R26-AT /R26-DT
DANGER!
These measurements are the tire changer’s working range.
Persons other than specially trained and authorized
operators are expressly forbidden to enter this area.
Choose a safe location that is in compliance with
current work place safety regulations.
Failure to properly install the machine can lead to
improper and unsafe operation.
Proper unit installation is necessary for safe use
and efficient operation. Proper installation also
helps protect the unit from damage and makes
service easier. Always keep this manual with unit.
Fig. 7.1
Fig. 7.2
