9
SECTION 6
LIFTING/ UNCRATING
1. The R2LT/ R23AT is shipped in a wooden crate or box
on pallet, (See Fig 6.1)
Approximate shipping dimensions:
R23LT: 51”W x 44”L x 39”H / 130mm x 112mm x 100mm
R23AT: 52W” x 45”L x 73”H/ 132mm x 114mm x 186mm
CAUTION!
Handling of the machine must be performed only with
an appropriate lifting device such as a forklift or pallet
jack. Only personnel who are experienced and
qualified on material handling procedures should
handle any transportation or moving of machine
.
CAUTION!
Be careful when cutting steel banding material as items
may become loose and fall causing personal harm or
injury. Always wear gloves when uncrating the machine to
prevent scratches, abrasions, or cuts due to the contact
with packing materials. Eye protection is essential during
uncrating service activity. Safety glasses with side shields,
goggles, or face shields are acceptable.
Remember to report any shipping damage to the carrier
and make a notation on the delivery receipt.
Uncrating Instructions
1. Using a crow bar or pry bar, locate the metal tabs and
pry open the tabs and or staples. (See Fig 6.3)
2. The entire wooden frame/box can be lifted off after
prying the tabs/staples at the base of the crate.
(See Fig 6.4)
3. Carefully cut the plastic wrapping and remove.
R23LT ONLY
CAUTION!
Secure the Tilt Tower with shop crane or
personnel prior to cutting metal strapping as Tilt Tower
may have shifted during shipping. Be careful as banding
may snap or fly when tension is released.
4. Either cut or unscrew the metal strapping holding the
Tilt Tower to the pallet and set aside. (See Fig 6.5)
Fig. 6.1
Fig. 6.3
Fig. 6.4
Fig. 6.5
Fig. 6.2
