10
5. While holding the Tilt Tower, carefully cut the Tilt
Tower free of the plastic wrapping securing it to the Tire
Changer base.
6. Carefully remove the rest of the plastic wrapping from
the Tire Changer.
7. Remove the front and rear Bolts and Nuts holding the
tire changer from the pallet. (See Figs. 6.6 - 6.7)
CAUTION!
Handling of the machine must be performed only
with an appropriate lifting device such as a forklift or
shop crane. Only personnel who are experienced and
qualified on material handling procedures should
handle any transportation or moving of machine
.
8. Using a shop crane or fork lift with lifting straps,
remove the Tire Changer from the wooden pallet. Use
only properly rated lifting straps under the Tire Changer
base. (See Fig. 6.8)
9. Locate the tire changer using the guidelines in Section
7, page 11.
Fig. 6.8
Fig. 6.6
Fig. 6.7
