background image

5

ArtNo.270-0001

Proplus control to high

If, when you release the control knob the burner goes out, the 
safety device has not held in. Turn the grill control knob to '0' 
and wait for one minute. Repeat the operation but hold the 
button and control knob in for slightly longer.

The low position, marked with the small flame symbol(

ArtNo.030-0025 - 

Gas flame symbols

), is 

beyond high, not between high and off.

ArtNo.270-0003

Proplus control to low

For best results, preheat the grill with the grill pan in the 
cooking position for two minutes before use. After placing 
your food on the grill pan grid, slide the grill pan onto the 
side supports. Adjust the grill heat to suit by turning the 
knob.

Make sure it is pushed right in and touches the backstop.

The grill pan grid can be turned over to give two grilling 
positions.

ArtNo.331-0002 Grill pan high/low position

 

Accessible parts may be hot when the grill is in use. 
Young children should be kept away. 

Do not leave the grill on for more than a few moments, 
without the grill pan underneath it.

 

Never close the grill door when the grill is on.

The Ovens

The clock must be set to the time of day before the left-
hand oven will work. See the following section on ‘The 
Clock’ for instructions on setting the time of day.

References to ‘left-hand’ and ‘right-hand’ ovens apply as 
viewed from the front of the appliance.

Before using for the first time, to dispel manufacturing 
odours turn the ovens to Mark 6 and run for an hour. To 
clear the smell make sure the room is well ventilated to the 
outside air, by opening windows or turning on a cooker hood 
for example. We recommend that people with respiratory 
problems should vacate the area for this brief period.

0

1

2

3

4

5

6

7

8 9

S

Push in and turn the knob controlling the oven to Gas Mark 9. 
The oven will light automatically.

0

1

2

3 4 5 6 7 8

9

S

Turn the control knob back to the Mark you wish to cook on 
and for best results preheat for 15 minutes before placing 
your dishes in the oven.

The ovens use our special ‘Heatflow’ system.

Because the oven burner is not hidden under the oven base 
you will see the burner flames at the back of the oven. This is 
perfectly normal.

Summary of Contents for Professional+ 110































Reviews: