Rangemaster Elise 110 Induction, User'S Manual & Installation Instructions

Page: 21 / 44

17
FRONT
Rear stop
Front
bracket
Telescopic Oven Shelf
(right-hand oven)
To fit the glide-out shelf, hook the front of the shelf onto the
runners as shown ( Fig. 2.26 ). The rear of the shelf should rest
on the runners, in front of the rear stop ( Fig. 2.26 ).
The glide-out shelf and runners can be easily removed or
repositioned.
To remove the glide-out shelf
Raise the rear of the shelf, so that it clears the rear stops. Then
unhook from the front locating bracket.
To remove the glide-out runners
Twist to unclip the base of the runners from the shelf
supports. Then unhook the runner from the top rung of the
shelf support and remove ( Fig. 2.27 ).
To refit the glide-out runners
Hook the rear of the runner over the top rung of a pair of shelf
supports. Then hook the front of the runner onto the same
rung. Push to clip under the bottom rung (
Fig. 2.28
).
Ensure that the shelf runners are fitted in the same position
on each side (
Fig. 2.29
).
The front of the shelf runners can be identified by the bracket
(
Fig. 2.26
).
n
DO NOT put the glide-out shelf runners in a
dishwasher.
Fig. 2.26
Fig. 2.27
1
2
2
1
Fig. 2.28
Fig. 2.29