23
Important:
When diagnosing or troubleshooting your system, always begin by reviewing
the Wired Network Settings and Wireless Network Settingsbelow.
Settings
Device Information
Firmware Version:
This is current firmware
version running on your Zonetech.
Serial Number:
This is the serial number of
your Zonetech unit.
Wired Network Settings
DHCP IP and Subnet Mask:
This is the
dynamic IP address and subnet mask
assigned through DHCP (Dynamic Host
Configuration Protocol), if supported by
your network.
Static IP and Subnet Mask:
This is the
manually assigned IP address and subnet
mask of the connected wired network.
MAC Address:
This displays the unique
MAC (Media Access Control) address of
your Zonetech device.
Wireless Network Settings
Enable:
This enables or disables wireless
network connection.
SSID:
This is the name of the connected
wireless network.
Password:
This is the password of the
connected wireless network.
Connection Status:
This is the status of
the current wireless network connection.
DHCP IP and Subnet Mask:
This is the
dynamic IP address and subnet mask
assigned through DHCP, if supported by
your network.
Static IP and Subnet Mask:
This is the
manually assigned IP address and subnet
mask of the connected wireless network.
MAC Address:
This displays the unique
MAC address of your Zonetech device.
Security
Limited Access Password:
This is the
password used for entering Limited access
mode in the web interface.
Full Access Password:
This is the
password used for entering Full access
mode in the web interface.
Front Panel Security:
This sets theaccess
level for the front panel controls:
Full
,
View
Only
, or
Limited
.
Note:
In View Only mode, no changes to
settings are permitted.
Summary of Contents for Zonetech
Page 1: ...UserGuide English 3 25 Appendix English 26 27...
Page 2: ...2...
Page 28: ...rane com Manual Version 1 0...
