SP-6 Track Overviews
Displays an
overview of
the track loaded to each sample slot. The
waveform, play head position, cue points
and selected loops will all be visible.
SP-6 Slot Volumes
Each
individual
sample
slot has a
separate volume slider and gain control.
Volume Sliders
- Use the volume slider to
mix and make temporary adjustments to
the volume of the sample you are playing.
These sliders act like your mixer’s,
fading from full volume right through to
completely silent.
Gain Knobs
- In addition to the volume
slider there is an additional gain knob for
each slot. These allow you to fine tune
the maximum gain volume of the loaded
sample. The gain adjustment will also be
written to the track’s ID3 tag, meaning that
it will be the same everytime you load it.
SP-6 Output Selector
Use the master output
selector button to choose
where you wish to have
the SP-6 output to.
L
to PGM 1 with
A
or
B
selected
as the PGM Source.
A
to
AUx.
R
to PGM 2 with
A
or
B
selected
as the PGM Source.
There is also a master sample
player
Gain
knob to adjust the
overall SP-6 volume.
Individual Output Selectors
By default
each sample
slot will be set to Master, mirroring the
SP-6 master output setting. You can
however, use the individual output
selector buttons to override the Master
output setting.
To send an individual slot to a different
output from the Master, deselect the
master option by clicking on the MASTER
button for the corresponding slot.
This will unlink the sample slot from the
master sample player output selection,
allowing you to choose the 1, 2, 3 or 4
PGM output for each slot. These output
routings will be saved when you close
down Scratch Live, so the next time
you launch Scratch Live, your preferred
settings will remain the same.
SP-6 Sample Banks
The SP-6 has four separate
sample banks, labeled A, B,
C and D. To switch between
the different banks click on the A, B, C
or D buttons. Each bank will save the
individual sample and sample slot settings
you last used, allowing you to prepare
banks for easy recall at a later stage.
Sample Bank A will load as the default.
SP-6 Mute Buttons
Use the mute buttons to mute the
audio output for each of the SP-6’s
sample slots. Click the mute button to
silence the audio output, click the mute
button again to turn the audio back on.
You can also ctrl-click on the mute
buttons to mute the outputs momentarily,
meaning that the audio will only be muted
for as long as you hold your mouse click.
TIP: You can MIDI assign these buttons,
allowing you to create a virtual kill
switch for the sample slot. To MIDI
assign momentary mute, hold ctrl and
click on the mute button before tapping
your MIDI controller.
SP-6 MIDI
All features of the SP-6 are MIDI
assignable. The SP-6 window must be
opened first before enabling MIDI assign
mode.
See “MIDI Control” on page
32.
To trigger samples from the Sixty-Two,
see “Cues / Samples control” on page
10.
DJ-FX Plugin
The DJ-FX Plugin gives you control of
two FX units, each with three chained
effects slots per unit. Each FX unit has
two control modes: Ultra Knob Mode and
Super Knob Mode, both of which can be
fully customized. The DJ-FX plugin opens
in Ultra Knob Mode by default.
The DJ-FX Plugin must be enabled in
the Plugins tab in the setup screen. Once
enabled, the DJ-FX panel button appears
in the panels area on the main screen.
See “Enable DJ-FX” on page 45.
To enable post-fader DJ-FX with the
INSERT
button,
see “Enable Mixer
DJ-FX Send” on page 45
NOTE: The DJ-FX plugin is not visible
if your Rane hardware is not connected.
Ultra Knob Mode
Click the Ultra Knob Mode
button to select Ultra Knob
Mode. This allows you to control up to
three effects slots in one FX unit using the
one Ultra Knob.
Click on the drop down menu to load an
Ultra Knob effect. (This is “empty” before
settings are saved in Macro Edit Mode.)
Click the
ON
button to enable the effect,
and use the Ultra Knob to control the wet
and dry amount of all effects.
Click the Show Parameters button
to show the effects and parameters
that are controlled by the loaded
Ultra Knob preset.
RANE SIXTY-TWO MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4
30