background image

SP-6 Pitch Controls

There are 
individual 
Pitch 
Slider, 
Bend, Nudge, and Keylock controls 
for each sample slot. The BPM is also 
displayed next to the pitch slider. If no 
BPM is present in the tracks ID3 tag, 
the pitch of the track is displayed as a 
percentage.
  Click and drag the pitch slider to make 
regular pitch adjustments. Hold the shift 
key and move the pitch slider to make fine 
pitch adjustments.
  Click on the 

+

 and 

 buttons to nudge 

the track into time. (temporary pitch 
adjustment)
Hold the ctrl key and click the 

+

 and 

 buttons to make ultra-fine pitch 

adjustments to nudge the track, adjusting 
the pitch permanently.

SP-6 ‘Play From’ Selector

Use the 
“Play 
From” selector to choose where the track 
will play from. You can choose to play a 
track from the start of the file, any one of 
the cue points, or any one of the loop in 
points.
  When this is set to play from start, or 
play from a cue point, the track will play 
right through until stopped. When a loop is 
selected, the track will play until the loop 
out point, unless you have “repeat” on, in 
which case the track will loop using the in 
and out points of the selected loop.
  The number of options will be 
dependent on the number of cue points 
and loops already set in your track. i.e 
if the track loaded has no cue points 
and loops set, then only “start” will be 
available as a “Play From” option.

TIP: To set or adjust cue and loop 
information for a track, load it to a 
Virtual Deck, make your adjustments, 
then load it back into the sample slot.

SP-6 Track Overviews

Displays an 
overview of 
the track loaded to each sample slot. The 
waveform, play head position, cue points 
and selected loops will all be visible.

SP-6 Slot Volumes

Each 
individual 
sample 
slot has a 
separate volume slider and gain control.

Volume Sliders

 - Use the volume slider to 

mix and make temporary adjustments to 
the  volume of the sample you are playing. 
These sliders act like your mixer’s, 
fading from full volume right through to 
completely silent.

Gain Knobs

 - In addition to the volume 

slider there is an additional gain knob for 
each slot. These allow you to fine tune 
the maximum gain volume of the loaded 
sample. The gain adjustment will also be 
written to the track’s ID3 tag, meaning that 
it will be the same everytime you load it.

SP-6 Output Selector

Use the master output 
selector button to choose 
where you wish to have 
the SP-6 output to.

L

 to PGM 1 with 

 

1

 or 

 

2

 selected 

as the PGM Source.

A

 to 

 AUx.

R

 to PGM 2 with 

 

1

 or 

 

2

 selected 

as the PGM Source.

There is also a master sample 
player 

Gain

 knob to adjust the 

overall SP-6 volume.

Individual Output Selectors

By default 
each 
sample slot will be set to Master, mirroring 
the SP-6 master output setting. You 
can however, use the individual output 
selector buttons to override the Master 
output setting.

  To send an individual slot to a different 
output from the Master, deselect the 
master option by clicking on the MASTER 
button for the corresponding slot.
  This will unlink the sample slot from the 
master sample player output selection, 
allowing you to choose the L, A, or 
R output for each slot. These output 
routings will be saved when you close 
down Scratch Live, so the next time 
you launch Scratch Live, your preferred 
settings will remain the same.

SP-6 Sample Banks

The SP-6 has four separate 
sample banks, labeled A, B, 
C and D. To switch between 
the different banks click on the A, B, C 
or D buttons. Each bank will save the 
individual sample and sample slot settings 
you last used, allowing you to prepare 
banks for easy recall at a later stage. 
Sample Bank A will load as the default.

SP-6 Mute Buttons

Use the mute buttons to mute the 
audio output for each of the SP-6’s 
sample slots. Click the mute button to 
silence the audio output, click the mute 
button again to turn the audio back on.
  You can also ctrl-click on the mute 
buttons to mute the outputs momentarily, 
meaning that the audio will only be muted 
for as long as you hold your mouse click.

TIP: You can MIDI assign these buttons, 
allowing you to create a virtual kill 
switch for the sample slot. To MIDI 
assign momentary mute, hold ctrl and 
click on the mute button before tapping 
your MIDI controller.

SP-6 MIDI

All features of the SP-6 are MIDI 
assignable. The SP-6 window must be 
opened first before enabling MIDI assign 
mode. 

See “MIDI Control” on page 

28.

RANE SIXTY-ONE MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4

26

Summary of Contents for SIXTY-ONE





















































Reviews: