OWNER’S MANUAL
19
SIXTY-EIGHT
USB Audio
There are six stereo record channels and five stereo playback channels. These channels are
simultaneously available on two USB ports, allowing two computers to share the device. This allows two
DJs to play together and supports uninterrupted transitions from one DJ to another. The six stereo record
channels are sent to both USB ports. The five stereo playback channels from each port are summed in
the mixer (playback-1 sums with playback-1 and playback-2 two sums with playback-2 etc.) USB audio is
32-bit floating point with a sample rate of 48 kHz.
Rane ASIO and Core Audio drivers allow the Sixty-Eight to act as a 12-record 10-playback USB sound
card for use with Serato DJ and third-party software applications that support ASIO or Core Audio. ASIO
and Core Audio drivers are multi-client, meaning they allow multiple applications on a computer to share
the device at the same time. ASIO and Core Audio drivers are not available if Scratch Live is running.
The Sixty-Eight has two USB ports, allowing simultaneous connection of two computers. Each port is
completely independent. It is possible to run Serato DJ on one port while running third-party software
using ASIO or Core Audio on the other, Mac or PC, in any combination.
Record channels are assigned as follows:
USB-1 Record is assigned to one of these:
• PH / CD 1
The playback channels are assigned as follows:
USB-1 Playback (Virtual Deck One)
•
PGM 1 SOURCE
selector
•
PGM 2 SOURCE
selector
USB-2 Playback (Virtual Deck Two)
•
PGM 1 SOURCE
selector
•
PGM 2 SOURCE
selector
USB-3 Playback (Virtual Deck Three)
•
PGM 3 SOURCE
selector
•
PGM 4 SOURCE
selector
USB-4 Playback (Virtual Deck Four)
•
PGM 3 SOURCE
selector
•
PGM 4 SOURCE
selector
USB-5 Playback is the RETURN on the USB
Insert in the FlexFx Loop.
See "DJ Changeover" on page 28.
See "Rane Drivers" on page 21.
· Pre-source selector
·
Supports Serato Vinyl Control
• AUX 1
• PGM 1 post fader
·
USB-2 Record is assigned to one of these:
• PH / CD 2
· Pre-source selector
· Supports Serato Vinyl Control
• AUX 2
• PGM 2 post fader
USB-3 Record is assigned to one of these:
• PH / CD 3
· Pre-source selector
· Supports Serato Vinyl Control
• AUX 3
• PGM 3 post fader
USB-4 Record is assigned to one of these:
• PH / CD 4
· Pre-source selector
· Supports Serato Vinyl Control
• AUX 4
• PGM 4 post fader
USB-5 Record is the SEND on the USB-5
Insert in the FlexFx Loop.
USB-6 Record is assigned to one of these:
• MIC 1
• MIC 2
• Main Mix
