background image

Before installation, disassembly, repair and maintenance of the 

product, the power plug must be unplugged and the water supply 

valve must be closed.

Do not use in an environment below 0 °C.

If this product will not be used for an extended period of time (over 

3 days), it is recommended to unplug the battery box, remove 

batteries, turn off water supply, and drain any water in the product.

When using electrical products, especially when children are 

present, basic safety precautions should always be followed, 

including the following:

1. This product is not intended for children (without proper adult 

supervision).

2. This product is not intended for individuals with reduced physical, 

sensory, or mental capabilities.

To prevent damage caused by freezing, please implement warmth

measures to increase the temperature of the toilet.

Caution

Do not place or store product where it can fall or be pulled into a tub 

or sink.

Do not place in or drop into water or other liquid.

Do NOT reach for a product that has fallen into water. Unplug the 

battery box immediately.

Do not stand on the ceramic toilet. Do not hit the ceramic. A heavy 

impact on ceramic leads to damage and water leakage.

Never embed ceramic toilet base in cementitious material ( such as 

cement mortar). It may lead to expansion crack.

Do not stand on ceramic toilet bowl, seat and cover.

Do not use varnish thinners, gasoline, liquid chemicals, detergents,

insecticides, toilet cleaners and scrubbing brush to clean the 

product.

Only use tap water or potable water, otherwise it may cause 

chafing.

Exposure to direct sunlight is prohibited.

This product is equipped with soft-closing seal cover. Heavy 

pressing or pushing may damage the soft-closing damper.

Do not connect water supply to heater outlet. Make sure inlet water

temperature at 3~35

,exceeding the specified range will result in 

the built-in heating module not working.

Do not lean against the seat cover when using the product to avoid 

damage.

Do not try flushing the newsprint, diapers, sanitary napkins and 

other items down the toilet, which may result in toilet clogging.

If this product is malfunctioning, stop using immediately, unplug the 

battery box, turn off water supply, and contact the service provider.

Mandatory

activities

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

02

Summary of Contents for W5100S

















Reviews: