Emergency troubleshooting
10
1. No water supply
Put around 2.1Gal (8L) water into a
barrel and flush the bowl .
Note: Avoid water spilling from bowl.
2. Replacement of battery
Unplug the DC plug of the battery box
and remove the battery box from the
bottom of the toilet.
Open the battery box and replace old
batteries.
Insert the DC plug of battery box into the
DC socket of toilet and then stick the
battery box to the Velcro on the bottom
of the toilet.
Notes:
1. Must be 1.5V “AA” alkaline battery.
2. Different brands, different used and new batteries cannot be mixed.
3. Battery life will be significantly reduced when using non-alkaline batteries.
4. When installing the inner box components, follow the installation direction shown in
the label.
Please turn on power and water supply
when using again.
3. Product unused for a period of time
When the product is left unused for a long time, especially in cold weather, it is highly
recommended to drain the water to prevent freezing.
To discharge water
1. Activate flushing, and then turn off angle
valve to stop water supply.
Note: Before water discharging,
the power must be cut off!
4. For your safety, it is recommended to
put antifreeze into the remaining water
in the bowl.
3. Disconnect the hose from angle valve,
drain the water and reconnect.
2. Unplug and cut off the electricity.
Summary of Contents for W5100S
Page 15: ......