R&T W5100S Installation And Operation Manual Download Page 3

Symbol lllustration

Please read the instructions carefully before installation and keep it available for future

maintenance or reference.
Failure to observe this instruction can cause body injury and property damage.

Safety instructions

Indicates that failure to follow the instruction may cause body

injury or property damage.

Symbol

Indication

Prohibited activities

Mandatory activities

Caution

Indicates that failure to follow the instruction may cause serious

injury or a fatal.

Warning

Do not throw cigarettes and other burning stuff into toilet, otherwise

it might cause fire.

Warning

Never disassemble, repair or modify this product. Doing so may

cause fire or electrical shock.

Do not wash the main unit or electrical plug with water or detergent.

Doing so may cause fire or electrical shock.

Do not handle the electrical plug with wet hands. Doing so may

cause electrical shock.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in 

order to avoid a hazard.

This product is electric appliance, so it must be placed far away

from water. Please don’t drench urine and other liquid to it.

Do not lay on side or upside the product during the electrical circuit,

to avoid fire or burning.

Do not install or use the product in wet or damp locations such as a

steam room.

Only use the factory equipped battery box and 1.5V “AA” alkaline 

battery.

The old aging water supply hose cannot be used, otherwise it 

might cause leakage, fire or electrical shock. Installation of the bidet 

seat should include specified components and new water supply 

hose.

When moving the product from a cold or humid environment to 

normal room temperature, please wait for 2 hours until the 

condensed water is completely volatilized to prevent electrical 

short-circuiting of the product.

Mandatory

activities

-

-

-

-

 

-

-

-

-

-

-

01

Summary of Contents for W5100S

















Reviews: