Preparing for Use
R&S
®
ZNH
12
Getting Started 1334.5979.02 ─ 03
3.1.4
Using the AC Adapter
Risk of instrument damage
To avoid instrument damage:
●
Only use the power supply (R&S HA-Z301, order number 1321.1386.02)
included in the delivery.
●
Make sure that the AC supply voltage is compatible to the voltage speci-
fied on the power supply unit.
●
Attach the appropriate adapter to the power supply.
Connect the AC adapter to the DC port on the left side of the R&S
ZNH (item 1 of
). Make sure to fully insert the AC adapter plug into the DC port.
Depending on the system you need, firmly connect the appropriate power cable
included in the delivery to the AC adapter (item 2 of
Finally, connect the power cable plug to an AC power outlet.
Figure 3-1: AC adapter
1 = AC adapter
2 = Power cable
The voltage range of the AC power supply is 100 V to 240 V AC.
After the R&S
ZNH is connected to the power supply, you can turn it on with the
[Power] key on the front panel.
Putting into Operation
www.allice.de
Allice Messtechnik GmbH
