Instrument Tour
R&S
®
SMW200A
38
Getting Started 1412.9220.02 ─ 21
Required option
Connector type
RF A: R&S
SMW-B120
RF B: R&S
SMW-B220
Test port adapter, PC 3.5 mm female
RF: R&S
SMW-B131/-B140/-B140N
Test port adapter, PC 2.92 mm female
RF: R&S
SMW-B144/-B144N
PC 1.85 mm female, including protective
adapter
NOTICE!
Risk of RF connector and cable damage. If you tighten the connectors
too strongly, you can damage the cables and connectors. If you do not tighten the
connectors enough, the measurement results can be inaccurate.
Always use an appropriate torque wrench suitable for this type of connector and
apply the torque specified in the application note
.
If your instrument is equipped with a test port adapter, refer also to
The application notes are available on the Internet and provide additional informa-
tion on care and handling of RF connectors.
Rohde
&
Schwarz offers appropriate torque wrenches for various connectors. For
ordering information, see the R&S
SMW data sheet or product brochure.
Note:
The R&S
SMW-B144/-B144N connectors come with a protective adapter to
prevent the sensitive connector from damage.
It is available as a spare part, and can be replaced if damaged. Contact your
Rohde
&
Schwarz support center or
www.customersupport.rohdeschwarz.com
information.
5.2
Rear Panel Tour
This section provides an overview of the connectors on the rear panel of the
instrument. For technical data of the connectors, refer to the data sheet.
Rear Panel Tour
