Preparing for Use
R&S
®
SMW200A
17
Getting Started 1412.9220.02 ─ 21
●
Use the cable R&S SMU-Z6 for connection to the DIG I/Q interfaces of the
instrument. The required cable is available under part number 1415.0201.02.
●
For connection to the HS DIG I/Q interfaces of the instrument, use:
– QSFP+ passive copper cable with max. length of 3 m
– Active optical cable with max. power class 2 module (2.0 W max. power
consumption)
Note the EMC classification in the data sheet.
4.1.2
Unpacking and Checking the Instrument
Unpack the R&S
SMW carefully and check the contents of the package.
●
Check if all items listed on the delivery note, including this getting started
manual, are included in the delivery.
●
Check the R&S
SMW for any damage.
If the contents are damaged, immediately contact the carrier who delivered
the package.
Packing material
Retain the original packing material. If the instrument needs to be transpor-
ted or shipped later, you can use the material to protect the control ele-
ments and connectors.
Risk of injury during transportation
The carrying handles at the front and side of the casing are designed to lift
or carry the instrument. Do not apply excessive force to the handles. If a
handle is ripped off, the falling instrument can cause injury.
Be aware of the weight of the instrument when lifting it. Observe the infor-
mation on transporting heavy instruments in the basic safety instructions
provided with the instrument.
4.1.3
Accessory List
The instrument comes with the following accessories:
Putting into Operation
