Instrument Tour
R&S
®
SMW200A
36
Getting Started 1412.9220.02 ─ 21
Table 5-5: Display keys
Display key
Assigned functions
[NEXT WINDOW]
Toggles between the active dialogs
[RESIZE WINDOW]
Adjusts the size of the active dialog to use the whole height of
the display.
[ESC]
Closes all kinds of dialog boxes, if the edit mode is not active.
Quits the edit mode, if the edit mode is active. In dialog boxes
that contain a "Cancel" button it activates that button.
For "Edit" dialog boxes the following mechanism is used:
●
If data entry has been started, it retains the original value
and closes the dialog box.
●
If data entry has not been started or has been completed, it
closes the dialog box.
5.1.3
Connectors
The RF and I/Q connectors and various others interface connectors are on the
front panel.
I/Q, I/Q Bar
I and Q inputs for external analog modulation signal directly fed into the I/Q mod-
ulator.
One pair of I and Q inputs are available per installed RF path.
The I/Q connectors are used to input single-ended signals or the positive signal
input for differential signals. The I/Q Bar connectors are used to input the nega-
tive signal for differential signals.
For more information, see chapter "Overview of the Input and Output Signals and
Connectors" in the user manual.
USB
USB (universal serial bus) interfaces of type A (host USB).
●
Connection of peripherals such as mouse or keyboard
●
Connection of memory stick for file transfer
●
Firmware update
Note:
Further USB interface type A (host USB) and a USB interface type B (USB
Device) are available on the rear panel.
See also
Chapter 4.2, "Connecting USB Devices"
Front Panel Tour
