R&S SMB100B, Getting Started

Page: 16 / 61

Preparing for Use
R&S
®
SMB100B
16 Getting Started 1422.1045.02 ─ 03
See also "Choosing the operating site" on page 9.
Electromagnetic compatibility classes
The electromagnetic compatibility (EMC) class indicates where you can operate
the R&S
SMB100B. The EMC class of the R&S SMB100B is given in the data
sheet under "General data".
●
Class B equipment is suitable for use in:
– Residential environments
– Environments that are directly connected to a low-voltage supply network
that supplies residential buildings
●
Class A equipment is intended for use in industrial environments. It can cause
radio disturbances in residential environments due to possible conducted and
radiated disturbances. It is therefore not suitable for class B environments.
If class
A equipment causes radio disturbances, take appropriate measures to
eliminate them.
4.4 Setting Up the R&S SMB100B
See also:
●
"Setting up the instrument" on page 9.
●
"Intended use" on page 8.
4.4.1 Placing the R&S SMB100B on a Bench Top
To place the R&S SMB100B on a bench top
1. Place the R&S SMB100B on a stable, flat and level surface. Ensure that the
surface can support the weight of the R&S SMB100B. For information on the
weight, see the data sheet.
2. CAUTION! Foldable feet can collapse. See "Setting up the instrument"
on page 9.
Always fold the feet completely in or out. With folded-out feet, do not place
anything on top or underneath the instrument.
Setting Up the R&S SMB100B