R&S SMB100A, Operating Manual

Page: 423 / 528

Remote Control Commands
R&S
®
SMB100A
408 Operating Manual 1407.0806.32 ─ 21
Example: ROSC:SOUR EXT
Selects the external source.
ROSC:EXT:FREQ 5 MHz
Informs the instrument that the external reference has a fre-
quency of 5 MHz.
Manual operation: See "Source" on page 143
7.13.15 SOURce:STEReo Subsystem
This subsystem contains the SCPI commands for generating FM stereo multiplex sig-
nals, the radio traffic service ARI (Automotive Radio Information) and Radio Data Sys-
tem (RDS). Additional functions are available using the
SOURce:STEReo:DIRect
commands (see Chapter 7.19, "Direct Commands for the Stereo/RDS Coder Option
R&S SMB-B5" , on page 456).
[:SOURce]:STEReo:ARI:BK[:CODE]
................................................................................ 408
[:SOURce]:STEReo:ARI:STATe
...................................................................................... 409
[:SOURce]:STEReo:ARI:TYPE
........................................................................................ 409
[:SOURce]:STEReo:ARI:TYPE:STATe
............................................................................. 410
[:SOURce]:STEReo:ARI[:DEViation]
................................................................................ 410
[:SOURce]:STEReo:AUDio:MODE
...................................................................................410
[:SOURce]:STEReo:AUDio:PREemphasis
........................................................................411
[:SOURce]:STEReo:AUDio:PREemphasis:STATe
............................................................. 412
[:SOURce]:STEReo:AUDio[:FREQuency]
......................................................................... 412
[:SOURce]:STEReo:DIRect
.............................................................................................412
[:SOURce]:STEReo:EXTernal:IMPedance
........................................................................413
[:SOURce]:STEReo:MMF
............................................................................................... 413
[:SOURce]:STEReo:PILot:PHASe
....................................................................................413
[:SOURce]:STEReo:PILot:STATe
.................................................................................... 414
[:SOURce]:STEReo:PILot[:DEViation]
.............................................................................. 414
[:SOURce]:STEReo:RDS:DATaset
.................................................................................. 414
[:SOURce]:STEReo:RDS:STATe
.....................................................................................414
[:SOURce]:STEReo:RDS:TRAFfic:ANNouncement[:STATe]
...............................................415
[:SOURce]:STEReo:RDS:TRAFfic:PROGram[:STATe]
...................................................... 415
[:SOURce]:STEReo:RDS[:DEViation]
...............................................................................415
[:SOURce]:STEReo:SOURce
..........................................................................................416
[:SOURce]:STEReo:STATe
.............................................................................................416
[:SOURce]:STEReo[:DEViation]
.......................................................................................417
[:SOURce]:STEReo:ARI:BK[:CODE] <Code>
Selects the area identification (BK) code of the ARI signal. The six letters (six different
frequencies) identify a specific region in each country. The code is generated if the BK
or DK+BK identifier of the ARI signal is activated.
Parameters:
<Code> A | B | C | D | E | F
*RST:
A
SOURce Subsystem