Remote control commands
R&S
®
RTO6
2226
User Manual 1801.6687.02 ─ 05
<n>
*
Specifies the field number within the frame.
<o>
*
Parameters:
<IndexMax>
Specifies the end value for the index range within the field.
The index range, increment and *RST values depend on the
field type.
TRIGger<m>:USBPd:IMIN
<Frame>, <Field>, <Data>
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:IMIN
<IndexMin>
Specifies the index, or sets the start value of an index range.
Suffix:
<m>
.
1..3
<n>
*
Specifies the field number within the frame.
<o>
*
Parameters:
<IndexMin>
Specifies the index value or index start value within the field.
The index range, increment and *RST values depend on the
field type.
TRIGger<m>:USBPd:IOPerator
<Frame>, <Field>, <Operator>
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:IOPerator
<IndexOperator>
Sets the operator for the index in the selected field of the selected frame.
Suffix:
<m>
.
1..3
<n>
*
<o>
*
Parameters:
<IndexOperator>
EQUal | INRange | RANGe
EQUal
This condition requires one endpoint value to be set using
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:IMIN
INRange | RANGe
This condition requires a range of endpoint values to be set
using
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:IMIN
and
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:IMAX
*RST:
INRange
Protocols