Remote control commands
R&S
®
RTO6
2225
User Manual 1801.6687.02 ─ 05
TRIGger<m>:USBPd:DMIN
<Frame>, <Field>, <Data>
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:DMIN
<DataMin>
Specifies the data pattern, or sets the start value of a data pattern range.
Suffix:
<m>
.
1..3
<n>
*
Specifies the field number within the frame.
<o>
*
Parameters:
<DataMin>
TRIGger<m>:USBPd:DOPerator
<Frame>, <Field>, <Operator>
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:DOPerator
<DataOperator>
Sets the operator for the data pattern in the selected field of the selected frame.
Suffix:
<m>
.
1..3
<n>
*
Specifies the field number within the frame.
<o>
*
Parameters:
<DataOperator>
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan |
INRange | OORange
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less than or equal, Greater than,
Greater than or equal. These conditions require one endpoint
value to be set using
INRange | OORange
In range, out of range. These conditions require a range of end-
point values to be set using
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:
*RST:
EQUal
TRIGger<m>:USBPd:IMAX
<Frame>, <Field>, <Data>
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:IMAX
<IndexMax>
Sets the end value of an index range if
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:
on page 2226 is set to
INRange
or
RANGe
.
Suffix:
<m>
.
1..3
Protocols