manualshive.com logo in svg

R&S RTC1000, User Manual, Page: 164 / 371

Share
Download
R&S RTC1000 User Manual Download Page 164

Network Connections and Remote Operation

R&S

®

RTC1000

164

User Manual 1335.7352.02 ─ 02

Figure 12-2: R&S

 

RTC1000 in the Device Manager of the computer

The following instrument folders are visible:

●

Internal Storage

:

Read-only folder, provides access to the files stored on the instrument, for exam-
ple, instrument settings, references, and formula sets.

●

Live Data

:

Read-only folder, provides access to multiple subfolders and current instrument
data. Files are created on demand. See 

"Live Data"

 

on page 165.

●

Upload

:

Read-write folder to send instrument settings files, firmware update files, and
license key files to the oscilloscope. The content is deleted when you turn off or
restart the instrument. The oscilloscope checks the data and loads it automatically
if possible. The firmware update must be started manually.

●

USB Front

If a USB flash drive is connected to the oscilloscope, an additional 

USB Front

folder is available. You can view the files and copy files to and from the computer
to the USB flash drive. The indicated file size is the actual file size.

USB Connection

Summary of Contents for RTC1000




















































































































































































































































































































































































Reviews:

No comments