Trying Out the Switch Unit
R&S
®
OSP
36
Getting Started 1178.7117.02 ─ 03
For switching relays and output channels, the "Toggle select mode" button
(orange, described below) must
not
be active.
6.5.2
Selection Mode
The "Toggle select mode" button switches the "Selection Mode" on or off. This
button (marked by a red circle in
) is only available in a view that shows
at least one module and its details.
Figure 6-8: Relay or channel selection dialog
Red circle
= "Toggle select mode" button. If the button is orange, the "Selection Mode" is
activated.
Green circle
= "Items selected" indicator. The icon is highlighted, if at least one relay or output
channel in any module is selected.
Orange frames = Selected relays and output channels are highlighted in the module's interaction
dialog
While the "Selection Mode" is active, tapping or clicking the icon of a relay or out-
put channel
does not change
its state, but only
selects or deselects
the relay
or channel. This selection is indicated by the color of the icon's frame changing
from gray to orange.
Use the selection mode for defining paths and output patterns.
To select or deselect all relays and output channels, go to "Module Opera-
tion" (or "Path Switching") > "Context Menu" > "Path Selection" > "Select
All" or "Deselect All".
Manual Module Operation
