![R&S OSP Series Getting Started Download Page 29](http://html1.mh-extra.com/html/rands/osp-series/osp-series_getting-started_3084345029.webp)
Trying Out the Switch Unit
R&S
®
OSP
29
Getting Started 1178.7117.02 ─ 03
6
Trying Out the Switch Unit
This chapter introduces the most important basic operations and settings of the
R&S
OSP step by step. For a complete overview, see the User Manual (
Prerequisite: the instrument is set up, connected to mains power supply and star-
ted up, as described in
Manual and Remote Modes of Operation
....................................................... 29
User Interface and Functional Elements
......................................................... 31
........................................................................................ 34
............................................................................ 34
...............................................................................35
6.1
Manual and Remote Modes of Operation
You can operate the switch unit by any of the following modes:
................................................................................. 29
.............................................................................. 30
Remote Operation by SCPI Commands
......................................................... 30
6.1.1
Direct Manual Operation
If you use an R&S
OSP230 or an R&S
OSP320 with display module R&S
OSP-
B300M, you can control your switch unit by the user interface on the integrated
touchscreen display.
Alternatively, with any of the R&S
OSP models, you can control your switch unit
via an external mouse and keyboard, connected to the USB interfaces (see (4) in
). Optionally (especially without integrated touchscreen), you can con-
nect an external monitor to the switch unit's HDMI interface (see (5)).
Figure 6-1: Operation by integrated touchscreen (1) or by external USB / HDMI devices (2)
Manual and Remote Modes of Operation