Trying Out the Switch Unit
R&S
®
OSP
31
Getting Started 1178.7117.02 ─ 03
To do so, you have two options:
●
For SCPI command communication, use a terminal program like R&S
Forum
or similar programming interface (for example with R&S
VISA driver). Remote
operation and RC commands are described in the User Manual.
●
Let a test system software like R&S
EMC32 or R&S
ELEKTRA send the
www.rohde-schwarz.com/product/emc32
and
www.rohde-schwarz.com/product/elektra
.
6.2
User Interface and Functional Elements
The switch unit R&S
OSP230 and the display
module R&S
OSP-B300M have a
touch-
screen display
.
Its functions are described in the User Manual.
The switch units R&S
OSP220 and
R&S
OSP320 have a
micro display
.
Use it to find the IP address in the first
2 lines and the subnet mask in the last
2 lines.
You cannot operate the switch units R&S
OSP220
‒
and the R&S
OSP320 with-
out display module R&S
OSP-B300M
‒
by their micro displays. To operate these
switch units without the graphical user interface of a built-in full touchscreen dis-
play, use one of the following alternatives:
●
, connect an external monitor to the
HDMI connector on the unit's front panel (labeled (5) in
nect a mouse and keyboard to the USB connectors, labeled (4).
●
Use the switch unit as a slave device in a master-slave setup, as described in
the User Manual.
●
Connect the switch unit to a local area network (LAN) by the RJ45 connector
on the unit's rear panel. The connector is labeled (1) in
unit's IP address from the micro display and proceed as described in
ter 6.1.2, "Manual Remote Operation"
User Interface and Functional Elements