R&S NRX Series, User Manual

Page: 380 / 514

Remote Control Commands
R&S
®
NRX
380 User Manual 1178.5566.02 ─ 07
TEST:USB:STORage? [<argument>]
Checks the connected memory stick.
Query parameters:
<argument> 0
Test passed
1
Test failed; no memory stick connected or memory stick does
not respond.
Usage: Query only
TEST:SENSor<Sensor>?
Starts a selftest of the selected power sensor and returns the result. In contrast to
*TST?
, this command returns detailed information that you can use for troubleshoot-
ing.
The response is sensor-dependent. It always contains an identification string for the
power sensor with the type name and the firmware version number. If an error has
occurred, the response also contains the error message in plain text.
Suffix:
<Sensor>
.
1 to 128
Configured sensor connected at: port A = 1, ... , port D = 4, R&S
NRX-B9 = 101, USB and LAN port = 5 to 100
Usage: Query only
Manual operation: See "Sensor Test" on page 151
SYSTem:SENSor<Sensor>:TEST?
See
TEST:SENSor<Sensor>?
on page 380.
Suffix:
<Sensor>
.
1 to 128
Configured sensor connected at: port A = 1, ... , port D = 4, R&S
NRX-B9 = 101, USB and LAN port = 5 to 100
Usage: Query only
Manual operation: See "Sensor Test" on page 151
13.12 Managing Setups and Correction Tables
Manages setups and frequency-dependent correction tables.
Further information:
●
Chapter 9, "Saving and Recalling Settings" , on page 132
Managing Setups and Correction Tables
www.allice.de Allice Messtechnik GmbH