Remote Control Commands
R&S
®
NGL200
127
User Manual 1178.8736.02 ─ 02.01
Setting parameters:
<Month>
Sets the month for the data logging function.
<Day>
Sets the day for the data logging function.
<Hour>
Sets the hour for the data logging function.
<Minute>
Sets the minute for the data logging function.
<Second>
Sets the second for the data logging function.
Example:
LOG:STIM 2018,08,18,08,18,18
LOG:STIM? -> 2018,08,18,08,18,18
LOG:TRIGgered
<state>
LOG:TRIGgered?
Sets/Queries the manual trigger for the data logging function.
Parameters:
<state>
OFF | ON | 0 | 1
OFF | 0
Manual trigger function will be deactivated.
ON | 1
Manual trigger function will be activated.
Example:
LOG:TRIG ON
LOG:TRIG? -> 1
7.10
Status Reporting
7.10.1
STATus:OPERation Registers
The commands of the
STATus:OPERation
subsystem control the status reporting
structures of the
STATus:OPERation
register.
The suffix at <Channel> selects the instrument. The range is <1...2>.
See also:
●
Chapter A.3.1, "Structure of a SCPI Status Register"
●
STATus:OPERation:INSTrument:CONDition?
....................................................................128
STATus:OPERation:INSTrument:ISUMmary<Channel>:CONDition?
....................................128
STATus:OPERation:INSTrument:ENABle
..........................................................................128
STATus:OPERation:INSTrument:ISUMmary<Channel>:ENABle
..........................................128
STATus:OPERation:INSTrument[:EVENt]?
........................................................................128
STATus:OPERation:INSTrument:ISUMmary<Channel>[:EVENt]?
........................................128
STATus:OPERation:INSTrument:NTRansition
................................................................... 129
Status Reporting