![background image](http://html1.mh-extra.com/html/rands/nge100b-series/nge100b-series_user-manual_3083288096.webp)
Remote Control
R&S
®
NGE100B
93
User Manual 5601.1343.02 ─ 04
ARBitrary:STARt
This command starts the previous transferred EasyArb waveform in channel 1 if Easy-
Arb is enabled.
Usage:
Event
ARBitrary:STOP
This command stops the EasyArb waveform in channel 1 if EasyArb is running.
Usage:
Event
6.5.14
DIO Commands
TRIGger:DIRection:DIO<IO>
<arg0>
This command sets or queries the specified Digital I/O line to function as Trigger Input
or Trigger Output.
Suffix:
<IO>
.
1..4
Parameters:
<arg0>
OUTPut | INPut
Example:
TRIG:DIR:DIO2 OUT
TRIGger[:ENABle]:DIO<IO>
<arg0>
This command sets or queries the state of the specified Digital I/O line.
The state is disabled when any setting has been changed
Suffix:
<IO>
.
1..4
Parameters:
<arg0>
{OFF | ON}
ON
Enable the state for Digital I/O line.
OFF
Disable the state for Digital I/O line.
TRIGger:IN:ARBitrary:DIO<IO>
<arg0>
This command sets or queries the operation mode when starting EasyArb by Trig IN.
Remote Control - Commands