Remote Control
R&S
®
NGE100B
91
User Manual 5601.1343.02 ─ 04
Parameters:
<Time>
Range:
0.010 to 10
*RST:
0.010
Default unit: ms
[SOURce:]VOLTage:RAMP[:STATe]
<arg0>
This command defines/queries the EasyRamp state for the previous selected channel.
Parameters:
<arg0>
{OFF | ON}
ON
EasyRamp function is activated.
OFF
EasyRamp function is disabled.
6.5.13
Arbitrary Commands
ARBitrary:CLEar
This command clears the previous defined arbitrary waveform data for channel 1.
Usage:
Event
ARBitrary:DATA
<arg0>
Defines or queries the arbitrary points for channel 1. The dwell time between two
points is from 10ms to 600s.
Parameters:
<arg0>
<Voltage1, Current1, Time1, Voltage2, Current2, Time2,..., Volt-
age128, Current128, Time128>
Voltage1 ... Voltage128
Defines the arbitrary points of the voltage.
Current1 ... Current128
Defines the arbitrary points of the current.
Time1 ... Time128
Defines the arbitrary points of the time (The unit for time is ms).
Example:
ARB:DATA "10.5,3,10,20,2,1000,15,2.1,10000"
ARBitrary:RCL
<arg0>
This command recalls EasyArb settings and previous defined arbitrary points from the
respective memory locations M1-M5.
Parameters:
<arg0>
Range:
0..4
Remote Control - Commands
