R&S FSMR3000, User Manual

Page: 653 / 733

Remote Commands
R&S
®
FSMR3000
653 User Manual 1179.0116.02 ─ 02
Despite the differences in system architecture and device features, the supported com-
mands have been implemented in a way to ensure a sufficiently high degree of corre-
spondence with the original.
This includes the support of syntax rules for not only newer device families (B and E
models) but for the previous A family as well.
In many cases the selection of commands supported by the R&S FSMR3 is sufficient
to run an existing GPIB program without adaptation.
After the introduction, this section includes the following topics:
● Command Set of Models 8560E, 8561E, 8562E, 8563E, 8564E, 8565E, 8566A/B,
8568A/B, 8591E, 8594E, 71100C, 71200C, and 71209A
..................................... 653
● Special Features of the Syntax Parsing Algorithms for 8566A and 8568A Models
.............................................................................................................................. 676
● Special Behavior of Commands ............................................................................677
● Model-Dependent Default Settings ....................................................................... 678
● Data Output Formats .............................................................................................679
● Trace Data Output Formats .................................................................................. 679
● Trace Data Input Formats ..................................................................................... 680
● GPIB Status Reporting ..........................................................................................680
12.11.2.1 Command Set of Models 8560E, 8561E, 8562E, 8563E, 8564E, 8565E, 8566A/B,
8568A/B, 8591E, 8594E, 71100C, 71200C, and 71209A
As with the original units, the R&S FSMR3 includes the command set of the A models
in the command set of the B models.
The HP model 8591E is compatible to HP model 8594E, the HP models 71100C,
71200C, and 71209A are compatible to HP models 8566A/B.
Command Supported subset Function Corresp. HP-
Models Status
A1 A1 Clear/Write A HP 8566A/
HP 8568A
available
A2 A2 Max Hold A HP 8566A/
HP 8568A
available
A3 A3 View A HP 8566A/
HP 8568A
available
A4 A4 Blank A HP 8566A/
HP 8568A
available
ABORT 1)
ABORT Stop previous function HP 856xE/
HP 8566B/HP
8568B/HP
8594E
available
Emulating Other Instruments' Commands