R&S FSMR3000, User Manual

Page: 108 / 733

Common Measurement Settings
R&S
®
FSMR3000
108 User Manual 1179.0116.02 ─ 02
In particular, the "Overview" provides quick access to the following configuration dialog
boxes (listed in the recommended order of processing):
1. Input
See Chapter 7.2, "Input and Frontend" , on page 108.
2. Trigger
See Chapter 7.3, "Trigger Settings" , on page 143.
3. Data Aquisition
See Chapter 7.4, "Data Acquisition" , on page 148.
4. Demod Settings
See Chapter 7.6, "Demodulation" , on page 156.
5. Output
See Chapter 7.5, "Output" , on page 150.
6. Analysis
See Chapter 8, "Common Analysis and Display Functions" , on page 173.
7. Demod/Display
See Chapter 6, "Measurements and Results" , on page 92.
Preset Channel ........................................................................................................... 108
Specific Settings for .................................................................................................... 108
Preset Channel
Select the "Preset Channel" button in the lower left-hand corner of the "Overview" to
restore all measurement settings
in the current channel to their default values.
Note: Do not confuse the "Preset Channel" button with the [Preset] key , which restores
the entire instrument to its default values and thus closes all channels on the
R&S FSMR3 (except for the default channel)!
Remote command:
SYSTem:PRESet:CHANnel[:EXEC]
on page 574
Specific Settings for
The channel can contain several windows for different results. Thus, the settings indi-
cated in the "Overview" and configured in the dialog boxes vary depending on the
selected window.
Select an active window from the "Specific Settings for" selection list that is displayed
in the "Overview" and in all window-specific configuration dialog boxes.
The "Overview" and dialog boxes are updated to indicate the settings for the selected
window.
7.2 Input and Frontend
The R&S FSMR3 can analyze signals from different input sources.
Input and Frontend