R&S FSMR3000, User Manual

Page: 143 / 733

Common Measurement Settings
R&S
®
FSMR3000
143 User Manual 1179.0116.02 ─ 02
Remote command:
INPut<ip>:GAIN:STATe
on page 433
INPut<ip>:GAIN[:VALue]
on page 433
7.2.6 Frequency
Access : "Overview" > "Input/Frontend" > "Frequency" tab
Center Frequency ....................................................................................................... 143
Center Frequency Stepsize .........................................................................................143
Center Frequency
Defines the center frequency of the signal in Hertz.
Remote command:
[SENSe:]FREQuency:CENTer
on page 428
Center Frequency Stepsize
Defines the step size by which the center frequency is increased or decreased using
the arrow keys.
When you use the rotary knob the center frequency changes in steps of only 1/10 of
the span.
The step size can be coupled to another value or it can be manually set to a fixed
value.
"Manual" Defines a fixed step size for the center frequency. Enter the step size
in the "Value" field.
Remote command:
[SENSe:]FREQuency:CENTer:STEP
on page 429
7.3 Trigger Settings
Access : Overview > Trigger
Triggering means to capture the interesting part of the signal. Choosing the right trigger
type and configuring all trigger settings correctly allows you to detect various incidents
in your signals.
Trigger Settings