R&S FSMR3000, User Manual, Page: 433 / 733

Remote Commands
R&S
®
FSMR3000
433 User Manual 1179.0116.02 ─ 02
ON | 1
Switches the function on
*RST:
1
Example: INP:EATT:AUTO OFF
12.5.4.3 Configuring a Preamplifier
INPut<ip>:GAIN:STATe
...................................................................................................433
INPut<ip>:GAIN[:VALue]
.................................................................................................433
INPut<ip>:GAIN:STATe <State>
This command turns the internal preamplifier on and off. It requires the optional pream-
plifier hardware.
The preamplification value is defined using the
INPut<ip>:GAIN[:VALue]
on page 433.
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
*RST:
0
Example: INP:GAIN:STAT ON
INP:GAIN:VAL 15
Switches on 15 dB preamplification.
Manual operation: See "Preamplifier" on page 142
INPut<ip>:GAIN[:VALue] <Gain>
This command selects the gain if the preamplifier is activated (
INP:GAIN:STAT ON
,
see
INPut<ip>:GAIN:STATe
on page 433).
The command requires the additional preamplifier hardware option.
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<Gain> For FSMR3008 and FSMR3026, the following settings are avail-
able:
15 dB and 30 dB
Configuring the Measurement