Safety and regulatory information
R&S
®
EDST300
3
Getting Started 1179.5647.02 ─ 01
1
Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the following chapters.
Intended use
The R&S
EDST300 is an analyzer designed for installing, testing and servicing
pulsed terrestrial navigation systems like DME and TACAN ground equipment.
Use the product only for its designated purpose. Observe the operating conditions
and performance limits stated in the data sheet.
Target audience
This document is aimed at installers, technicians and operators of the
R&S
EDST300. It assumes the readers are familiar with basic handling of electri-
cal equipment and have knowledge of avionic navigation systems.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●
In
Chapter 1.1, "Safety instructions"
on page 3. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1
Safety instructions
Products from the Rohde
&
Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Inten-
ded use and limits are described in the product documentation such as the data
Safety instructions
