Preparing for use
R&S
®
EDST300
12
Getting Started 1179.5647.02 ─ 01
Operating altitude
The maximum operating altitude is provided in the data sheet. It differs in battery
operation and operation with an external power supply.
Electromagnetic compatibility classes
The electromagnetic compatibility (EMC) class indicates where you can operate
the product. The EMC class of the product is given in the data sheet.
●
Class
B equipment is suitable for use in:
– Residential environments
– Environments that are directly connected to a low-voltage supply network
that supplies residential buildings
●
Class
A equipment is intended for use in industrial environments. It can cause
radio disturbances in residential environments due to possible conducted and
radiated disturbances. It is therefore not suitable for class B environments.
If class
A equipment causes radio disturbances, take appropriate measures to
eliminate them.
4.4
Setting up the product indoors
The R&S
EDST300 can be operated in various places without detrimental effects
on its features. Even the movement caused by transportation or mobile use does
not impair its functioning.
See also:
●
4.4.1
Placing the product on a bench top
If you want to set up the R&S
EDST300 on a benchtop or prepare the
R&S
EDST300 for mobile use, proceed as follows.
To place the product on a bench top
1. Place the product on a stable, flat and level surface. Ensure that the surface
can support the weight of the product. For information on the weight, see the
data sheet.
Setting up the product indoors
